Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 115
[H] Stacker home position sensor (S33)
[I] Folding motor encoder sensor (S34)
(3) Release the latch, and then take off the sad-
dle tray paper detection sensor.
Fig. 4-326
(1) Take off the stacker unit.
P.4-37 "[H] Stacker unit"
(2) Move the stacker to the position where the
stacker home position sensor is seen.
(3) Release the latch, and then take off the
stacker home position sensor.
Fig. 4-327
(1) Take off the saddle unit.
P.4-26 "[A] Saddle unit"
(2) Remove 1 screw, and then disconnect the
connector and take off the folding motor
encoder sensor.
Fig. 4-328
Saddle tray paper detection sensor
Stacker guide
Stacker home
position sensor
Stacker guide
Folding motor
encoder sensor