Toshiba MJ-1104 Printer Accessories User Manual


 
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM) / FIRMWARE UPDATE
7 - 10
7.2.3 Update of SDL board
(1) Attach the ROM to the download jig.
Make sure that the ROM and its direction are correct.
Fig. 7-15
(2) Turn OFF the power of the equipment.
(3) Open the front upper cover and then pull out the saddle unit.
(4) Loosen 2 screws and open the saddle control PC board access cover.
Fig. 7-16
(5) Connect the download jig with the jig connector (CN16) on the Saddle control board.
Fig. 7-17
Connector Mark for ROM
installation direction
ROM
LED
Saddle control PC board access cover
Download jig