Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 93
[D] Shutter opening / closing sensor (S4)
[E] Buffer tray home position sensor (S5)
(5) Release the latch, and then take off the pad-
dle home position sensor.
Fig. 4-261
(1) Take off the grate-shaped guide.
P.4-10 "[N] Grate-shaped guide"
(2) Release the latch, and then disconnect the
connector to take off the shutter opening/
closing sensor.
Fig. 4-262
(1) Take off the buffer unit.
P.4-15 "[B] Buffer unit"
(2) Remove 2 screws to take off the rear side
frame.
Fig. 4-263
Paddle home position sensor
Shutter opening
/ closing sensor
Rear side
frame