Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING
6 - 28
[CB81] Flash ROM abnormality
Is the error recovered when the power of the equipment is turned OFF and then back ON?
YES End.
NO
1. Check if the conductor pattern on the finisher controller PC board (FIN) is open circuited or
short circuited.
2. Replace the finisher control PC board (FIN).
[CB91] Saddle flash ROM abnormality
Is the error recovered when the power of the equipment is turned OFF and then back ON?
YES End.
NO
1. Check if the conductor pattern on the saddle controller PC board (SDL) is open circuited or
short circuited.
2. Replace the saddle control PC board (SDL).