Filter
Top Products
7
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
PREVENTIVE MAINTENANCE (PM) / FIRMWARE UPDATE
7 - 5
*g EFS carrier shaft
Apply an adequate amount of white grease (Molykote EM-30L) to the entire EFS carrier shaft.
Fig. 7-7
*h Grate-shaped guide
After the grate-shaped guide is cleaned with alcohol, use a cleaning brush to apply coating material
(Molykote CFD-409M) on the part with which the paper edge is in contact.
* Use a cleaning brush (4407915710 BRUSH-33) because cloth contaminated with the coating
material shall be treated as industrial waste.
* Do not apply coating material (Molykote PD-910) to the rubber section of the grate-shaped tray.
* When coating material adheres to the skin, rinse it well with water.
Fig. 7-8
EFS carrier shaft
Grate-shaped
guide