Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 6
[C] Paper exit to the movable tray
Paper transported from the Finisher feeding section to the movable tray side is transported to the buffer
tray with the exit roller driven by the exit motor (M11).
Paper transport is detected by the transport sensor (S2).
Fig. 3-7
The paper transported to the buffer tray it then exited to the movable tray by the buffer rollers driven by
the buffer roller drive motor (M4).
At this stage, the shutter clutch (CLT1) is turned ON and the shutter is pulled up by the drive of the
transport motor (M7) to prevent the paper from being transported to the finishing tray.
The opening and closing statuses of the shutter is detected by the shutter opening/closing sensor (S4).
Fig. 3-8
Exit motor
Transport sensor
Exit roller
Buffer tray
Shutter opening/
closing sensor
Shutter
Transport motor
Shutter clutch
Buffer roller
drive motor
Buffer roller
Buffer tray
Buffer tray