Filter
Top Products
E6581381
A-10
1
3) Control circuit terminal board
The control circuit terminal board is common to all equipment.
M3 screw
(0.5N•m)
Connector for common
serial communications
and option (RJ45)
Wire size Factory default settings of slide switches
Solid wire: 0.3
∼ 1.5 (mm
2
) SW4: SINK (Negative) side (WN type)
SOURCE (Positive) side (WP type)
Stranded wire: 0.3
∼ 1.5 (mm
2
) FM (SW2): V side
(AWG 22
∼ 16) VIA (SW3): V side
Sheath strip length: 6 (mm)
Screwdriver: Small-sized flat-blade screwdriver
(Blade thickness: 0.4 mm or less, blade width: 2.5 mm or less)
⇒ See section 2.3.2 for details on all terminal functions.