Filter
Top Products
E6581381
D-8
4
■ How to use the wizard function
Key operated LED display Operation
Displays the operation frequency (operation stopped).
(When standard monitor display selection H= [Operation
frequency])
CWH
The first basic parameter “CWH” (Wizard function) is displayed.
CW
Press the ENT key to confirm your choice. The first parameter in the
purpose-specific wizard parameter group is displayed. (See Table below)
( ) ****
After moving to the purpose-specific wizard parameter group, change the
setting of each parameter by pressing the or key and the ENT key.
GPF
GPF is dialyzed on completion of the setting of the wizard parameter
group.
Parameter
display
↓
CWH
↓
HTH
↓
Press the MODE key to exit the wizard parameter group.
By pressing the MODE key, you can return to the default monitoring mode
(display of operation frequency).
■ How Parameters of Quick setting wizard
Title Function
CW
Automatic
acceleration/deceleration
CEE
Acceleration time 1
FGE
Deceleration time 1
NN
Lower limit frequency
WN
Upper limit frequency
VJT
Motor thermal protection
HO
Meter adjustment
RV
V/F control mode selection
XN
Base frequency 1
XNX
Base frequency voltage 1
MODE
ENT
MODE
MODE
MODE