Filter
Top Products
PhaserShare Networking Manual
93
TCP/IP Host Configuration (UNIX)
8
5.
Perform the appropriate step for your HP-UX version:
■ Version 9.x. Highlight Printers and Plotters from the menu. Press
Return or click Open.
■ Version 10.x. Double-click the Printers and Plotters icon.
6.
Perform the appropriate step for your HP-UX version:
■ Version 9.x. Highlight Printers/Plotters from the menu. Press Return
or click Open.
■ Version 10.x. Again, double-click the Printers and Plotters icon.
7.
From the Actions menu, select Add Remote Printer/Plotter.
8.
Fill in the fields. See the following table for example entries
and descriptions. Access SAM's help utility for additional information
about these fields.
9.
To save your changes, click OK at the bottom of the window.
10.
When you are asked about sending a test file to the printer, type no. (It is
recommended that you do not let SAM send a test file because it may not
be compatible with your printer.)
11.
Exit SAM:
a.
From the File menu, select Exit.
b.
Click Exit SAM.
Field name Example entry Description
Printer Name phaser360PS The name you use to access the printer.
You can use any name you want.
Remote System name tekphaser The name that you entered in your
/etc/hosts
file as the remote
machine name.
Remote Printer name PS Queue name that the printer recognizes:
■ PS for PostScript
■ PCL for text
■ HPGL for HP7475A
■ AUTO for automatic selection.
Remote cancel model rcmodel -
Remote status model rsmodel -
Printer class (
version 9.x
) - Optional
Remote printer is on a
BSD system?
- Check the box for a BSD system.