Filter
Top Products
12
PhaserShare Networking Manual
2
PhaserShare Series B Network Interfaces
Ethernet connections and indicators
The printer’s built-in Ethernet connector
The printer’s built-in Ethernet connector has the following connections and
indicators:
1.
LINK indicator (Phaser 360 only); on indicates a working connection to a
hub, off indicates no connection to a hub.
2.
RCV indicator (green); blinks while the network interface is receiving.
3.
XMT indicator (yellow); blinks while the network interface is transmitting.
4.
Twisted pair (10BaseT) connector.
PhaserShare Series B Ethernet card
The PhaserShare Series B Ethernet card has the following connections and
indicators:
1.
TX indicator (yellow); blinks while the network interface is transmitting.
2.
RX Link indicator (green); blinks while the network interface is receiving.
3.
Speed indicator (yellow); on indicates 100 Mbps, off indicates 10 Mbps.
4.
Twisted pair connection indicator; on indicates a working connection to a
hub, off indicates no connection to a hub. If the 10Base2 connector (
6
) is
used, this indicator is off.
5.
Twisted pair (10BaseT or 100BaseTx) connector.
6.
Thin coax (10Base2) connector.
0180-01
Ethernet
RCV XMT
LNK
1
2
4
3
9789-05
13 5 6
24
100
Mbs
10/100Base-TX
10Base2
TP
LINK
TX
RX
PhaserShare
TM
Series B
Ethernet Card