Filter
Top Products
iv
PhaserShare Networking Manual
7 TCP/IP Printer Configuration (All Platforms)
Setting the printer’s IP addressing parameters 55
General information on setting IP parameters (front panel) 57
Setting IP parameters: Phaser 840 printer front panel 57
Setting IP parameters: Phaser 740 printer front panel 58
Setting IP parameters: Phaser 780 printer front panel 60
Setting IP parameters: Phaser 360 printer front panel 63
Setting IP parameters: RARP or BOOTP 65
Setting IP parameters: DHCP 66
Supported BOOTP/DHCP fields 68
Enabling and disabling RARP and BOOTP/DHCP (front panel) 69
Setting IP parameters: PhaserLink Printer Management Software 73
Controlling host access 76
Receiving printer status 79
8 TCP/IP Host Configuration (UNIX)
Configuring a host 83
Troubleshooting 94
9 TCP/IP Configuration (OS/2 Warp/LAN Server)
Setting the printer’s IP addressing parameters 95
Creating an LPR queue in OS/2 Warp Connect (direct LPR connection to the printer) 96
OS/2 client-to-server setup 97
Warp Server 4.0/Warp Connect 98
10 Windows NT
Setting the printer’s IP address 99
Adding the Windows NT 4.0 driver on a Windows NT 4.0 server or workstation 99
Adding the Windows NT 4.0 driver on a
Windows NT 3.51 server 104
Adding a Windows NT 3.x driver 109
Windows NT network communication 112
Windows NT network troubleshooting 113
11 Windows 95 and Windows 98: PhaserPort Software
TCP/IP configuration for the PC 117
Setting the printer’s IP address 117
PhaserPort software installation 118
Adding a port for a new printer 119
Adding a port to an existing printer 119
Changing a port’s IP address 120