Filter
Top Products
PhaserShare Networking Manual
129
Printer Management
13
Phaser 840 Intelligent Ready
Intelligent Ready is an automated system that monitors the Phaser 840 printer’s
usage and warms up the printer when you are most likely to need it. You can turn
Intelligent Ready on or off from the printer’s front panel. Using PhaserLink Printer
Management Software, you can control when the printer automatically warm s up.
Enabling and disabling Intelligent Ready from the front panel
1.
In the front panel, scroll to Menu; press Select.
2.
Scroll to Printer Configuration; press Select.
3.
Scroll to Default Printer Settings; press Select.
4.
Scroll to Advanced Printer Settings; press Select.
5.
Scroll to Intelligent Ready. Press Select to turn this option on or
off.
6.
Scroll to Exit; press Select to return to the Ready to Print message.
Setting up Intelligent Ready using PhaserLink Printer Management Software
1.
On any PhaserLink page, click Configuration. This displays the View and
Configure Settings page.
2.
From the View and Configure Settings page, click View and Configure
Intelligent Ready Settings. This displays the View and Configure
Intelligent Ready Settings page.
3.
Select a Warmup Mode:
■ Intelligent. In this mode, the printer monitors usage patterns and
warms up automatically when you are most likely to need it.
■ Scheduled. This mode allows you to specify a warmup time for each
day of the week. If you select this mode, use the Sunday through
Saturday fields to select warmup times.
■ Job Activated. In this mode, the printer warms up when it receives a
print job.
4.
If a validation password has been assigned, enter the password to make the
change to take effect.
5.
Click Do/Apply.
N
O
T
E
PhaserLink passwords are not encrypted.