Filter
Top Products
PhaserShare Networking Manual
103
Windows NT
10
2.
If this printer is to be shared on the network, click Shared and click all
applicable platforms that may be printing to this printer. If desired, enter a
Share Name for the printer. If the printer is a local printer only, click Not
shared. Click Next.
Windows NT creates the printer
1.
If you want Windows NT to print a test page after installing the printer
driver, click Yes (recommended). If you do not want the Windows NT test
page, click No. When finished, click Finish.
2.
At this point, Windows NT is ready to create the printer. You may need the
original Windows NT distribution CD-ROM or your printer’s software
CD-ROM to complete this step. Once the CD-ROM is installed, type the
drive letter or path name to the files requested. On the Windows NT
CD-ROM, the files are usually in the I386 directory for Intel-based
Windows NT servers. Click OK.
3.
If you chose to have a test page printed in Step 1, check to see if it printed.
If the test page printed, click OK.