Filter
Top Products
36
PhaserShare Networking Manual
4
Novell NetWare Configuration
Information needed for NDS connections
■ Specify the current Directory Services Tree; (the tree where the print
server will reside).
■ Specify the current Directory Services Context. (the location in the
directory services tree where the print server will reside).
■ Create and select a new queue, or select an existing queue; click Finish.
Verify information and finish the configuration
After you have entered the configuration information, the Quick Configuration
Wizard displays the Configured Printer Information dialog box, which reports the
information you have entered.
1.
Verify that the information is correct.
■ If the information is correct, click Apply Changes.
■ If the information is not correct, click Back to return to previous dialog
boxes and correct the information. Click Next to return to the
Configured Printer Information dialog box. Click Apply Changes.
■ To exit the wizard and return to the Main window without making any
changes, click Cancel.
2.
After you click Apply Changes, the printer resets; the changes take effect
when the reset is complete.
3.
After the reset, you are prompted to print a test page. It is recommended
that you print a test page to verify a successful installation.
Troubleshooting Windows configurations
Printer does not appear in the Main window printer list
1.
Make sure that the printer is turned on and properly connected to the
network. Try a different network drop or port.
2.
Make sure that NetWare is enabled on the printer. This is reported on the
printer’s Configuration Page in the NetWare field. For information on
enabling and disabling protocols, see Chapter 15, “Disabling Protocols”.
3.
If your network uses a router, configure the router to not suppress NetWare
SAP (Service Advertising Protocol) packets or packets of the frame type the
printer is using.
If you are using bindery emulation, make sure that NDS is disabled. From
the PhaserShare Administrator Print Server tab, uncheck the Directory
Services checkbox.