Filter
Top Products
PhaserShare Networking Manual
33
Novell NetWare Configuration
4
Configuration software for NetWare
Windows software
■ PhaserShare Administrator (Tektronix). Use this application to configure
the printer and the network when using NetWare 3.x and 4.x.
■ NWAdmin (Novell). Use this utility to manage existing queues on
networks running NetWare 4.x in NDS mode.
DOS software
■ NWSET (Tektronix). Use this application to configure the printer with
NetWare 3.x and 4.x. For more information on NWSET, see the README
file in the NETWARE directory of the printer’s or CD-ROM.
■ NWCONFIG.PS (Tektronix utility file). In DOS environments and other
non-Windows environments, you can use this to configure the printer for
NetWare 4.x networks. The PostScript code contained in the file
NWCONFIG.PS is also available in a Macintosh file called Configure
NetWare. For more information on NWCONFIG.PS, see the README file in
the UTILS directory of the printer’s or CD-ROM. For more information on
Configure NetWare, see the ReadMe file in the Network Utilities directory of
the printer’s or CD-ROM.
■ PCONSOLE (Novell). Use this utility to manage existing queues with
NetWare 3.x and 4.x (both Bindery and NDS modes).
NetWare configuration for Windows environments
This is a quick configuration procedure using the Tektronix PhaserShare
Administrator. For information on installing the PhaserShare Administrator, see
Chapter 5, “PhaserShare Administrator Software for NetWare Networks”. For
detailed information on the PhaserShare Administrator, functions, see the
PhaserShare Administrator on-line help.
Printing the Configuration Page
Your printer’s Configuration Page reports information that you need for NetWare
configuration. For information on printing a Configuration Page, see “The printer’s
Configuration Page” on page 6.
N
O
T
E
On the printer’s Configuration Page, all zeros in one or more of the IPX Networks
fields indicates that the printer does not recognize the network connection; this
probably indicates a faulty cable connection, an incorrect frame type, or Reply to
Get Nearest Server has not been set to on. It must be set to on for at least one file
server or router on the same segment as the printer.