Filter
Top Products
160
PhaserShare Networking Manual
15
Disabling Protocols
5. Disabling EtherTalk:
To return the printer to normal operation, go
immediately to Step 8; to continue and disable the EtherTalk protocol,
follow these steps:
a.
Press ---->; the front panel displays EtherTalk.
b.
Press Menu; the front panel displays the current status of the protocol:
EtherTalk:Enabled or EtherTalk:Disabled. The current
status is marked with an asterisk (*) in the upper-right corner of the
display.
c.
Press ----> until the front panel displays EtherTalk:Disabled.
d.
Press OK to disable the protocol; the front panel briefly displays
Selected, then it displays EtherTalk.
6. Disabling NetWare:
To return the printer to normal operation, go
immediately to Step 8; to continue and disable the NetWare protocol,
follow these steps:
a.
Press ---->; the front panel displays NetWare.
b.
Press Menu again; the front panel displays Interface.
c.
Press Menu to display the current status of the protocol:
Interface:Enabled or Interface:Disabled. The current status
is marked with an asterisk (*) in the upper-right corner of the display.
d.
Press ----> until the front panel displays Interface:Disabled.
e.
Press OK to disable the protocol; the front panel briefly displays
Selected, then it displays Interface.
f.
Press Exit (the far left button) to return to the NetWare display.
7. Disabling HTTP:
To return the printer to normal operation, go immediately
to Step 8; to continue and disable the HTTP protocol, follow these steps:
a.
Press ---->; the front panel displays HTTP.
b.
Press Menu; the front panel displays the current status of the protocol:
HTTP:Enabled or HTTP:Disabled. The current status is marked
with an asterisk (*) in the upper-right corner of the display.
c.
Press ----> until the front panel displays HTTP:Disabled.
d.
Press OK to disable the protocol; the front panel briefly displays
Selected, then it displays HTTP.