Filter
Top Products
158
PhaserShare Networking Manual
15
Disabling Protocols
Disabling protocols: front panel
N
O
T
E
If you are attempting to perform any front panel procedure and you don’t see the
expected menu choices on the front panel display, the front panel may be locked.
For information on how to unlock it, see “If the front panel is locked” on page 165.
Phaser 840 printer
1.
When the front panel displays READY TO PRINT, press the down-arrow
button until Menu is highlighted. Press Select.
2.
Press the down-arrow button until Printer Configuration is
highlighted. Press Select.
3.
Press the down-arrow button until Network Settings is highlighted.
Press Select.
4. To disable EtherTalk (or TokenTalk):
a.
Press the down-arrow button until EtherTalk (or TokenTalk) is
highlighted.
b.
Press Select until Off is displayed.
■ To return the printer to normal operation, press the down-arrow
button until Exit is highlighted. Press Select.
■ To disable other protocols, continue with Step 5.
5. To disable NetWare:
a.
Press the down-arrow button until NetWare is highlighted. Press
Select.
b.
Press the down-arrow button until NetWare is highlighted.
c.
Press Select until Off is displayed.
■ To return the printer to normal operation, press the down-arrow
button until Exit is highlighted. Press Select.
■ To disable other protocols, press the up-arrow button until
Previous Menu is highlighted. Press Select. Continue with
Step 6.