Filter
Top Products
102
PhaserShare Networking Manual
10
Windows NT
Install the driver
1.
In the Add Printer Wizard dialog box, click Have Disk to add a new
Tektronix driver.
2.
Type the path name to the driver files. This can be A:\ if the files are on a
diskette. If these files were downloaded from an on-line service, type the
path name where they were saved. Click OK.
3.
Select the printer model and click Next.
4.
If prompted that a driver is already installed for this printer, select Replace
existing driver. Click Next.
Name the printer and set up sharing
1.
Type the printer's name; this can be any name you want. If the
Windows-based applications are to use this printer as the default printer,
click the appropriate box. Click Next.