Filter
Top Products
52
PhaserShare Networking Manual
6
TCP/IP Configuration Overview
Before you begin
■ Do not turn on the printer yet. Your printer should be set up and
connected to the network. See your printer’s user documentation for
information about setting up the printer. For information about connecting
the printer to the network, see Chapter 2, “PhaserShare Series B Network
Interfaces”.
■ Install the files from the your printer’s CD-ROM on to the hard disk of the
workstation you will be using for the TCP/IP configuration. For more
information, see the next topic, “Extracting files from unix.tar”.
Extracting files from
unix.tar
The file unix.tar contains all shell scripts and other files needed for network
configuration in UNIX environments. The file is in UNIX tar format. The file is
included with your printer’s networking software.
Listing the contents of
unix.tar
Type this command:
Where directory-name is the mount point or the directory that contains the file. For
example:
Extracting the files
1.
Change (cd) to the directory on your workstation where you want the files
to reside.
2.
Type this command:
Where directory-name is the mount point or the directory that contains the file. For
example:
Printing the Configuration Page
Your printer’s Configuration Page reports important information that you will need
for TCP/IP configuration. For information on printing a Configuration Page, see
“The printer’s Configuration Page” on page 6.
tar tvf /directory-name/unix.tar
tar tvf /mnt/unix.tar
tar xvf /directory-name/unix.tar
tar xvf /mnt/unix.tar