Filter
Top Products
PhaserShare Networking Manual
35
Novell NetWare Configuration
4
Select a print server
In the Main window Printer List, click the print server name/printer name.
N
O
T
E
If the printer does not show up in the list of available printers, there could be a
network hardware problem, an incorrect frame type, or incorrect search options
settings (see “Printer does not appear in the Main window printer list” on page 36).
Launch the Quick Configuration Wizard
Click Quick Configuration to launch the Quick Configuration Wizard.
Configure the printer and set up queues
1.
If desired, change the Print Server Name or Printer Name.
2.
Select connection mode(s) by checking the box(es) for Bindery Services,
NDS Services, or both (the Phaser 740, 780, and 360 printers support both).
3.
Click Next. The dialogs that follow allow you to configure Bindery
connections, NDS connections, or both. Supply the following information
for these connections:
a.
Click File Servers to display the File Servers Browse dialog box.
b.
Select the server you want. Click OK. You are returned to the File
Server Selection dialog box.
c.
Select either the configuration file server or the preferred file server
from the drop-down list. Click Next.
Information needed for Bindery connections
Select either the configuration file server or the preferred file server from
the drop-down list; click Next.
If the file server you want is not on the list, proceed with these steps:
Create and select a new queue, or select an existing queue; click Finish.