Filter
Top Products
164
PhaserShare Networking Manual
15
Disabling Protocols
7. Disabling HTTP:
To return the printer to normal operation, go immediately
to Step 8; to continue and disable the HTTP protocol, follow these steps:
a.
Press ---->; the front panel displays HTTP.
b.
Press Menu again; the front panel displays the current status of the
protocol: HTTP:Enabled or HTTP:Disabled. The current status
is marked with an asterisk (*) in the upper-right corner of the display.
c.
Press ----> until the front panel displays HTTP:Disabled.
d.
Press OK to disable the protocol; the front panel briefly displays
Selected, then it displays HTTP.
8.
Return the printer to normal operation:
a.
Press Exit until the front panel displays Network Settings.
b.
Press Exit again.
■ If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
Reset, the printer resets. If you press Resume, the front panel
displays Network Settings. Press Exit; the printer returns to
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
■ If you have not changed any parameters that require a printer reset
to take effect, the front panel displays Ready.