Filter
Top Products
82
PhaserShare Networking Manual
7
TCP/IP Printer Configuration (All Platforms)
Setting SNMP parameters using a PostScript utility file
To create a PostScript file to control these parameters, use the script config-SNMP
provided with the printer’s network utilities software.
1.
Connect the printer to the network.
2.
Run the script config-SNMP:
a.
Change (cd) to the bin subdirectory in the directory where you placed
your printer’s network utilities.
b.
Run the script, redirecting the output to a file. Type:
3.
When prompted, provide the information for the SNMP utility.
4.
Send the file named in Step 2b to the printer using lp or lpr.
config-SNMP > filename