Filter
Top Products
PhaserShare Networking Manual
9
Network Printing with Tektronix Color Printers
1
Obtaining networking software for Phaser 360 printers
You obtain the networking software from the CD-ROM by running the installer:
1.
Locate and run the installer on the printer’s CD-ROM. On a PC, the file is
SETUP.EXE; on a Macintosh, it is Phaser 360 Installer.
2.
When you are prompted to select Easy Install or Custom Install,
select Custom Install.
3.
In the Custom Install dialog box, check the box for Network Utilities.
4.
If you are running the installer on a computer that has NetWare software
installed, you can also check the boxes to install the PhaserShare
Administrator software. For more information on the PhaserShare
Administrator software, see Chapter 5, “PhaserShare Administrator
Software for NetWare Networks”.
5.
To complete the installation, follow the on-screen prompts.
Network administration software
The following table lists the network administration software according to
environment (network protocol, platform, and printer).
Network administration software
Environment Software
NetWare; Windows 95,
Windows NT, and
Windows 3.1
Network queue configuration: PhaserShare Administrator (Novell PCONSOLE
and NWAdmin can also be used.)
Printer configuration: PhaserShare Administrator (Over TCP/IP, PhaserLink
Printer Management Software can also be used; Novell’s PCONSOLE and
NWAdmin cannot configure the PhaserShare network interface.)
Printer status monitoring: Windows Print Monitor (over TCP/IP, PhaserLink
Printer Management Software can also be used; PhaserLink Printer Management
Software provides status on additional Tektronix printer features.)
TCP/IP; Windows 95 and
Windows 3.1
Printer configuration: PhaserLink Printer Management Software
Printer status monitoring: PhaserLink Printer Management Software
TCP/IP; Windows NT Printer configuration: PhaserLink Printer Management Software (PhaserLink
Printer Management Software does not set up queues on the print server.)
Printer status monitoring: PhaserLink Printer Management Software
AppleTalk; Macintosh 7.x
and 8.x
Printer configuration: PhaserLink Printer Management Software (MacTCP or
Open Transport required)
Printer status monitoring: PhaserLink Printer Management Software (MacTCP
or Open Transport required)
TCP/IP; UNIX Printer configuration: PhaserLink Printer Management Software (If using
PhaserPrint for UNIX for printing, use PhaserPrint to set up print queues.)
Printer status monitoring: PhaserLink Printer Management Software