Filter
Top Products
58
PhaserShare Networking Manual
7
TCP/IP Printer Configuration (All Platforms)
5. Set the IP address:
a.
Press the down arrow button until IP Address is highlighted. Press
Select.
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
6. Set the network mask:
a.
Press the down arrow button until NW Mask is highlighted. Press
Select.
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
7. Set the default router/gateway address:
a.
Press the down arrow button until Default Router/Gateway
Address is highlighted. Press Select.
b.
Press the left or right arrow buttons to highlight the 3-digit part of the
address that you want to set. Press the up or down arrow keys to
change the numbers.
c.
When the address is set, press Select.
8.
To return the printer to normal operation, press the down arrow button
until Exit is highlighted. Press Select.
Setting IP parameters: Phaser 740 printer front panel
N
O
T
E
When you set the IP addressing parameters from the front panel, the selections for
DHCP/BOOTP and RARP are automatically set to Disabled.
1.
Press Menu; the front panel displays Help Pages.
2.
Press ----> or <---- until the front panel displays Network Settings.
3.
Press Menu until the front panel displays TCP/IP.
4.
To set the IP address:
a.
Press Menu again; the front panel displays Interface.
b.
Press ----> to display TCP/IP Address.