Filter
Top Products
8
PhaserShare Networking Manual
1
Network Printing with Tektronix Color Printers
How to tell which protocols are enabled
All protocols can be enabled and disabled. The Configuration Page reports which
protocols are enabled. If a protocol is enabled, the field for that protocol lists the
current parameters. If the protocol is disabled, the field for that protocol contains an
entry reading Disabled.
The printer’s networking software
The printer is shipped with a software CD-ROM, which contains software that you
may need to install your printer on a network. The CD-ROM also contains on-line
documentation, printer drivers, and other printer software. A single integrated
installer is used to install printer drivers and other software.
Obtaining networking software for Phaser 840, 740, and 780 printers
You obtain the networking software from the CD-ROM by running the installer:
1.
Insert the printer’s software CD-ROM into the CD-ROM drive.
■ If the Windows autorun feature is enabled, the CD-ROM launches
automatically.
■ If the Windows autorun feature is disabled, double-click My
Computer, then double click the CD icon to launch the CD-ROM.
2.
View the brief introductory information, then click Install Drivers to
launch the installer.
3.
When you are prompted to select Easy Install or Custom Install, select
Custom Install.
4.
In the Custom Install dialog box, check the box for Network Utilities.
5.
If you are running the installer on a computer that has NetWare software
installed, you can also check the boxes to install the PhaserShare
Administrator software. For more information on the PhaserShare
Administrator software, see Chapter 5, “PhaserShare Administrator
Software for NetWare Networks”.
6.
To complete the installation, follow the on-screen prompts.