Filter
Top Products
PhaserShare Networking Manual
41
Novell NetWare Configuration
4
3.
Enable or disable the frame type:
a.
Press ----> until the frame type you want is displayed.
b.
Press Menu to display the current status of the frame type:
Enabled or Disabled.
c.
Press ----> until the frame type is either Enabled or Disabled,
as desired.
d.
Press OK to enter your choice into the printer. The front panel
briefly displays Selected, then returns to the display of the frame
type name.
4.
You can set more than one frame type; to set other frame types, repeat
Step 3.
5.
Return the printer to normal operation:
a.
Press Exit (the far left button) until the front panel displays Network
Settings.
b.
Press Exit again.
■ If you have changed any parameters that require a printer reset
to take effect, you are prompted to reset the printer. If you press
Reset, the printer resets. If you press Resume, the front panel
displays Network Settings. Press Exit (the far left button);
the printer returns to normal operation, but the changes you
have made do take effect until the next time the printer is reset.
■ If you have not changed any parameters that require a printer
reset to take effect, the front panel displays Ready.
Setting IPX frame types: Phaser 780 printer
1.
Enter the Network Settings menu:
a.
While Ready is displayed, press Select; the Printer menu is
displayed:
b.
Press the left or right arrow buttons until the front panel displays
Network Settings.
c.
Press Menu to enter the Network Settings menu; Network
Settings appears on the top line of the display.
Printer Menu
Help Pages Menu
Printer Menu
Network Settings Menu