Filter
Top Products
ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-162
© 2000, ADC Telecommunications, Inc.
DLP-548
Page 3 of 5
HLX/HRX STATUS
Group: 1 Slot: 2 Circuit ID:
HLXC HRX1 HRX2 HLXR
=========== =========== =========== ===========
DS1 Loopback : INACTIVE N/A N/A INACTIVE
DS1 LOS : YES N/A N/A YES
DS1 Line Code : AMI N/A N/A AMI
DS1 Frame Format : N/A N/A N/A N/A
Loop Reversal : N/A N/A N/A NO
HSKP1/HSKP2 : N/A N/A N/A NO
PWR1/PWR2 : N/A N/A N/A NO
HLXC CRP1 RRP1 CRP2 RRP2 HLXR
HDSL LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2
============= === === === === === === === === === === === ===
HDSL LP STAT: NRM NRM N/A N/A N/A N/A N/A N/A N/A N/A NRM NRM
T/R Reversal: N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A NO NO
SNR Exceeded: NO NO N/A N/A N/A N/A N/A N/A N/A N/A NO NO
BER Exceeded: NO NO N/A N/A N/A N/A N/A N/A N/A N/A NO NO
Pulse Attn : +0 +0 N/A N/A N/A N/A N/A N/A N/A N/A +0 +0
SNR margin : +26 +26 N/A N/A N/A N/A N/A N/A N/A N/A +24 +25
Press CONTROL-A For Assistance
14858-A
Note:
The SNR and PA values are only updated when the HDSL loop is active. If the HDSL loop
has never been activated, the SNR value will be set to 71, and the PA value will be set to 0.
Figure 548-1. HLX Status Screen (MPU V5.3 Without an HRX)
HLX/HRX STATUS
Group: 1 Slot: 2 Circuit ID:
HLXC HRX1 HRX2 HLXR
=========== =========== =========== ===========
DS1 Loopback : INACTIVE INACTIVE N/A INACTIVE
DS1 LOS : YES N/A N/A YES
DS1 Line Code : AMI N/A N/A AMI
DS1 Frame Format : N/A N/A N/A N/A
Loop Reversal : N/A NO N/A NO
HSKP1/HSKP2 : N/A N/A N/A NO
PWR1/PWR2 : N/A N/A N/A NO
HLXC CRP1 RRP1 CRP2 RRP2 HLXR
HDSL LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2
============= === === === === === === === === === === === ===
HDSL LP STAT: NRM NRM NRM NRM NRM NRM N/A N/A N/A N/A NRM NRM
T/R Reversal: N/A N/A NO NO N/A N/A N/A N/A N/A N/A NO NO
SNR Exceeded: NO NO NO NO NO NO N/A N/A N/A N/A NO NO
BER Exceeded: NO NO NO NO NO NO N/A N/A N/A N/A NO NO
Pulse Attn : +0 +0 +0 +0 +0 +0 N/A N/A N/A N/A +0 +0
SNR margin : +25 +25 +24 +24 +25 +25 N/A N/A N/A N/A +24 +24
Press CONTROL-A For Assistance
14857-A
Note:
The SNR and PA values are only updated when the HDSL loop is active. If the HDSL loop
has never been activated, the SNR value will be set to 71, and the PA value will be set to 0.
Note: Figure 548-4 provides a key to the HRX status column headings shown in this figure.
Figure 548-2. HLX/HRX Status Screen (MPU V5.3 With One HRX)