Filter
Top Products
ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-163
© 2000, ADC Telecommunications, Inc.
DLP-548
Page 4 of 5
11374-B
HLX/HRX STATUS
Group: 1 Slot: 4 Circuit ID:
HLXC HRX1 HRX2 HLXR
=========== =========== =========== ===========
DS1 Loopback : INACTIVE INACTIVE INACTIVE INACTIVE
DS1 LOS : YES N/A N/A YES
DS1 Line Code : AUTO-AMI N/A N/A AUTO-AMI
DS1 Frame Format: AUTO-ESF N/A N/A AUTO-ESF
Loop Reversal : N/A NO NO YES
HSKP1/HSKP2 : N/A N/A N/A N/A
PWR1/PWR2 : N/A N/A N/A N/A
HLXC CRP1 RRP1 CRP2 RRP2 HLXR
HDSL LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2 LP1 LP2
============== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ====
HDSL IP STAT: NRM NRM NRM NRM NRM NRM NRM NRM NRM NRM NRM NRM
T/R Reversal: N/A N/A NO NO N/A N/A NO NO N/A N/A NO NO
SNR Exceeded: NO NO NO NO NO NO NO NO NO NO NO NO
BER Exceeded: NO NO NO NO NO NO NO NO NO NO NO NO
Pulse Attn : +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0 +0
SNR margin : +23 +23 +23 +23 +23 +23 +23 +23 +23 +23 +24 +24
Press CONTROL-A For Assistance
Note:
The SNR and PA values are only updated when the HDSL loop is active. If the HDSL loop has
never been activated, the SNR value will be set to 71, and the PA value will be set to 0.
Note:
Figure 548-5 provides a key to the HRX status column headings shown in this figure.
Figure 548-3. HLX/HRX Status Screen (MPU V5.3 With Two HRXs)
KEY
NEND means "at the HLXC, looking toward the customer (HLXR)."
FEND means "at the HLXR, looking toward the network (HLXC)."
REPC means "at the HRX, looking toward the customer (HLXR)."
REPR means "at the HRX, looking toward the network (HLXC). "
REPR (PM Reports) = C-SIDE (Display Status) = LINE 1 (TL1)
REPC (PM Reports) = R-SIDE (Display Status) = LINE 2 (TL1)
9450-B
XCVR
NEND
NEND
FEND
XCVR
XCVR
XCVR
HRXHLXC
HLXR
REPR REPC
REPR REPC
FEND
LOOP 1
LOOP 2
LOOP 1
LOOP 2
TO NETWORK
TO CUSTOMER
Note:
NEND and FEND are not reported in HLX/HRX Status screens
Figure 548-4. HDSL HLXC/HLXR C-SIDE and R-SIDE Locations (MPU V5.1 With One HRX)