Filter
Top Products
Receiving Documents
5-2
Receiving Documents
5
Receiving Documents
You can receive document transmission automatically.
Available Paper Sizes
When the machine receives a document, it is printed on the same size paper
loaded in the machine.
If the machine runs out of all sizes of paper, the document is received in memory.
If the received documents are small or large in size, the following paper sizes are
selected (when the Rotate Printing mode is set to ‘ON’).
■ Available Paper Sizes for Received Documents
* Received documents automatically reduced before being printed are indicated with an asterisk (*).
NOTE
•
You can print the received document on the following paper sizes only: 11'' ✕ 17'' ,
LGL , LTR , LTR , and STMT .
•
If you are printing the document with paper loaded in the stack bypass, select a paper
type other than envelope. See “Selecting and Storing Settings,” in the Reference Guide.)
•
You can set whether to use the fax function for each paper drawer or stack bypass. The
default setting is ‘ON’ (for the fax function) for all drawers and the stack bypass. (See
“Selecting and Storing Settings,” in the Reference Guide.)
•
You can set the machine to reduce the size of the received document automatically when
it does not match the paper size available on this machine. The preset reduction ratios
are 75%, 90%, 95%, or 97%. (See “Printing in Reduced Form,” on p. 5-14.)
•
You can change the order in which the paper size is selected. (See “Printing Methods,” on
p. 5-11.)
•
The received document is output face down, and in the order it was received.
11'' x 17'' originals 11'' x 17'' ➞ LGL * ➞ LTR *➞ LT R * ➞ STMT
x 2*
LGL originals LGL ➞ 11'' x 17'' ➞ LT R * ➞ LTR * ➞ STMT
x 2*
LTR originals LTR ➞ LTR ➞ LGL ➞ 11'' x 17'' ➞ STMT *
LTR originals LTR ➞ LTR ➞ 11'' x 17'' ➞ LGL ➞ STMT *
STMT originals STMT ➞ LT R ➞ LT R ➞ LGL ➞ 11'' x 17''
STMT originals LTR ➞ LTR ➞ STMT * ➞ LGL ➞ 11'' x 17''