Canon 2010F Fax Machine User Manual


 
Setting Up Speed Dialing
2-29
Speed Dialing
2
NOTE
If you selected <01 USING # KEY>, you can assign the access code to (#).
If you selected <02 OTHER>, you can assign the access code to any
one-touch speed dialing key. (See “Program One-Touch Keys,” on p. 10-3.)
8
Press [F3] () or [F4] () to highlight <02 NO OF
CHARACTERS> press [OK].
The NO OF CHARACTERS menu appears.
9
Press [F2] (-) or [F3] (+) to enter the number of characters for
the access code press [OK].
The display returns to the SYSTEM SETTINGS menu.
IMPORTANT
If access codes are already registered for one-touch or coded speed dialing, the
message <THE ACCESS CODE IS ALREADY SET CHANGE THE SETTING
AFTER CLEARING> appears on the screen for about two seconds. You cannot
change the number of characters. Delete the access codes first, then change the
number of characters.
NOTE
The access code can be two to five characters long.
You can also use numeric keys to enter the number of characters for the access
code.
10
Press [Reset] to return to the Fax Basic Features screen.
F3
F4
OK
F2
F3
OK
Reset