Filter
Top Products
Printing Received Documents
5-14
Receiving Documents
5
Printing in Reduced Form
Follow the procedure below to set the machine to print received documents in a
reduced size to match the paper sizes loaded in the paper drawers.
If you set the RX REDUCTION to ‘01 ON’, you can set the following settings (the
default settings are marked with an asterisk):
• RX REDUCTION (AUTO REDUCTION*/FIXED REDUCTION): You can select to
reduce the document automatically or select a preset reduction ratio.
• SELECT REDUCE % (97%, 95%, 90%*, or 75%): You can select a preset
reduction ratio.
• SELECT REDUCE DIR (HORIZ & VERTICAL*, or VERTICAL ONLY): You can
select to reduce the document both vertically and horizontally, or just vertically at a
fixed reduction ratio.
NOTE
The default setting for RX REDUCTION is ‘01 ON’.
1
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
The FAX SETTINGS menu appears.
2
Press [F3] (▼) or [F4] (▲) to highlight <05 PRINTER
SETTINGS> ➞ press [OK].
Each time you press (▼) or (▲), the next or previous menu option
becomes highlighted.
Additional Functions
F3
F4
OK
F3
F4
OK
F3
F4