Filter
Top Products
Registering the Required Sender Information
1-18
Before You Use the Fax Functions
1
The transmission type settings menu appears.
5
Press [F3] (▼) or [F4] (▲) to highlight <01 ON> ➞ press [OK].
If you do not want the TX Terminal ID printed on the documents the recipients
receive, select <02 OFF> ➞ press [OK].
The TX TERMINAL ID menu appears.
6
Press [F3] (▼) or [F4] (▲) to highlight <01 TTI POSITON> or
<02 TEL NUMBER MARK>.
The display returns to the USER SETTINGS menu.
● If you selected <01 TTI POSITION>:
❑ Press [OK] ➞ press [F3] (▼) or [F4] (▲) to highlight <01 OUTSIDE IMAGE> or
<02 INSIDE IMAGE>
➞ press [OK].
<01 OUTSIDE IMAGE>: This prints the TX Terminal ID outside the image
area on the output fax.
<02 INSIDE IMAGE>: This prints the TX Terminal ID inside the image area
on the output fax.
The display returns to the TX TERMINAL ID menu.
● If you selected <02 TEL NUMBER MARK>:
❑ Press [OK] ➞ press [F3] (▼) or [F4] (▲) to highlight <01 FAX> or <02 TEL>
➞ press [OK].
<01 FAX>: This prints the letters <FAX> before the telephone number.
<02 TEL>: This prints the letters <TEL> before the telephone number.
F3
F4
OK
F3
F4
F3
F4
OK
OK
F3
F4
OK
OK