Filter
Top Products
Registering the Required Sender Information
1-16
Before You Use the Fax Functions
1
The UNIT NAME menu appears.
4
Enter the unit’s name using the numeric keys ➞ press [OK].
The unit’s name is registered, and the display returns to the USER SETTINGS
menu.
NOTE
•
The unit’s name can be up to 24 characters long.
•
If you entered a wrong letter, use the cursor keys to go back to the position you
want to correct ➞ press (Delete)
➞
enter the correct letter.
•
To delete the entire entry, press (Clear).
5
Press [Reset] to return to the Fax Basic Features screen.
Registering the Sender Information (TX Terminal ID)
Follow the procedure below to select whether to send documents with the TX
Terminal ID.
The TX Terminal ID is printed on the top of every page the other party receives,
telling the recipient the sender’s name and fax number.
IMPORTANT
In the United States, this setting must be ‘ON’. Please see “FCC (Federal
Communications Commission),” on p. xiii and “Registering the Required Sender
Information,” on p. 1-12 for details on FCC rules governing the use of facsimile equipment
in the United States.
NOTE
•
If you set the TX TERMINAL ID to ‘01 ON’, you can select the position where the TX
Ter minal ID appears on the recording paper, and also select a Telephone Number Mark.
•
The default settings are as follows:
- TX Terminal ID: ‘01 ON’
- TX Terminal ID position: ‘01 OUTSIDE IMAGE’
-Telephone Number Mark: ‘01 FAX’
OK
123
456
789
0
@.
GHI
PRS
ABC
JKL
TUV
DEF
MNO
WXY
OPER
SYMBOLS
Reset