Filter
Top Products
Using Speed Dialing
2-31
Speed Dialing
2
3
Open the appropriate one-touch speed dialing panel ➞ press
the desired one-touch speed dialing key. If you do not see the
number of the key you want, open the first or second one-
touch speed dialing panel to see more keys.
The registered number and name of the key are displayed.
After five seconds (10 seconds for sequential broadcasting), the machine starts to
scan and send the document automatically.
NOTE
•
Close all one-touch speed dialing panels to access keys 01 to 21. Open the first
panel to access keys 22 to 42, and the second panel to access keys 43 to 63.
•
If you press the wrong one-touch speed dialing key, press (Clear) ➞ press the
correct one-touch speed dialing key.
•
If you have preset a time to send documents to the number registered under the
one-touch speed dialing key, the machine will send the documents at the preset
time.
•
If you want to cancel the transmission after you press a one-touch speed dialing
key, press
(Stop)
.
4
Press [Start] to scan your documents immediately.
Otherwise, the machine waits for five seconds before it starts to scan. This
timeout feature can be turned ‘OFF’. (See “Time Out Mode,” on p. 4-7.)
Scanning starts.
Coded Speed Dialing
Follow this procedure to start a transmission and send a document by pressing
[Coded Dial], followed by a three-digit code.
You can register up to 137 destinations for coded speed dialing.
IMPORTANT
To use this feature, you must first register a number for coded speed dialing. (See “Coded
Speed Dialing,” on p. 2-12.)
63
01
C
Start