Filter
Top Products
Receive Settings
5-8
Receiving Documents
5
4
Press [F3] (▼) or [F4] (▲) to highlight <01 OFF> or <02 ON> ➞
Press [OK]
The display returns to the RX SETTINGS menu.
5
Press [Reset] to return to the Fax Basic Features screen.
2 on 1 Mode
Follow the procedure below to set the machine to print two pages of received
documents on one sheet of paper.
To use this feature, the following conditions should be met:
• The paper loaded into the selected paper drawer must be large enough for two
consecutive pages to be printed on it.
• If the machine runs out of LTR paper and has 11" × 17" paper remaining, the
machine prints two LTR pages side by side on one 11" × 17" paper.
• Conversely, if the machine runs out of 11" × 17" paper and has LTR paper
remaining, the machine reduces the image size automatically, and prints two LTR
pages that equal one 11" × 17" piece of paper one by one on LTR paper.
A separation line is printed in the center of each page using the 2 on 1 feature. If
the machine is set to print the RX page footer, the separation line is printed in the
location that corresponds to the center of page after excluding the RX page footer
printing area.
NOTE
The default setting is ‘01 OFF’.
1
Press [Additional Functions] ➞ press [F3] (▼) or [F4] (▲) to
highlight <03 FAX SETTINGS> ➞ press [OK].
The FAX SETTINGS menu appears.
F3
F4
OK
Reset
Additional Functions
F3
F4
OK