Filter
Top Products
Configuring System Information 113
Defining SNTP Global Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
SNTP Global Settings
page.
The following is an example of the CLI commands:
Table 6-5. SNTP Global Parameters CLI Commands
CLI Command Description
sntp client poll
timer
seconds
Sets the polling time for the SNTP client
sntp broadcast
client enable
Enables SNTP Broadcast clients
sntp anycast client
enable
Enables SNTP Anycast clients
sntp unicast client
enable
Enables SNTP predefined Unicast clients
sntp unicast client
poll
Enables polling pre-defined Unicast SNTP
servers
show sntp
configuration
Displays the SNTP configuration.
show sntp status Displays the SNTP status.
Console(config)# sntp anycast client enable