Filter
Top Products
274 Configuring Switch Information
www.dell.com | support.dell.com
E
ntries can be queried by
Port
,
MAC Address
, or
VLAN ID
.
3
Click
Query
.
The
Dynamic Address Table is queried.
Sorting the Dynamic Address Table
1
Open the
Dynamic Address Table
page.
2
From the
Address Table Sort Key
drop-down menu, select whether to sort addresses by
address, VLAN ID, or interface.
3
Click
Query
.
The
Dynamic Address Table is sorted.
Current Address Table
The
Current Address Table contains dynamic address parameters by which packets are directly
forwarded to the ports. The Current Address Table contains the following fields:
• VLAN ID — Indicates the VLAN Tag value.
• MAC — Indicates the MAC address.
• Port — Indicates the port number.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting dynamic
addresses as displayed in the
Dynamic Address Table
.
The following is an example of the CLI commands:
Console (config)# bridge aging-time 300
Console (config)# exit
Console# show bridge address-table
Aging time is 300 sec
Table 7-13. Query and Sort CLI Commands
CLI Command Description
bridge aging-time
seconds
Sets the address table aging time.
show bridge address-table
[vlan vlan] [ethernet
interface
| port-channel
port-channel-number
]
Displays classes of dynamically created
entries in the bridge-forwarding database.