Filter
Top Products
126 Configuring System Information
www.dell.com | support.dell.com
Figure 6-17. OOB IP Interface Parameters
The
OOB IP Interface Parameters
page contains the following parameters:
IP Address
—The Out-of-Band interface IP address.
Prefix Length
—The number of bits that comprise the source IP address prefix, or the network
mask of the source IP address.
Ty pe
—The means by which the Out-of-Band IP interface was created; DHCP or static.
Remove
—When checked, removes the interface from the
IP Address
drop-down list.
NOTE: You can configure DHCP IP addresses for Out-of-Band management on the DHCP IP Interface
page (System→ IP Address→ DHCP IP Interface).
Adding an IP Interface
1
Open the
OOB IP Interface Parameters
page.
2
Click
Add
to display the
Add a Static OOB IP Interface
page.
3
The
Network Mask
field specifies the subnetwork mask of the source IP address.
4
Complete the fields in the page.
5
Click
Apply Changes
.
The new interface is added, and the device is updated.