Filter
Top Products
192 Configuring System Information
www.dell.com | support.dell.com
Deleting a
TACACS+
Server from the
TACACS+
Servers List
1
Open the
TACACS+ Settings
page.
2
Click
Show All
.
The
TACACS+ Table
opens.
3
Select a
TACACS+ Table
entry.
4
Select the
Remove
check box.
5
Click
Apply Changes
.
The TACACS+ server is removed, and the device is updated.
Defining
TACACS+
Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields displayed in
the
TACACS+ Settings
page.
Table 6-37. TACACS+ Settings CLI Commands
CLI Command Description
tacacs-server host {
ip-
address | hostname
}
[single-connection] [port
port-number
] [timeout
timeout
] [key
key-string
]
[source
source
] [priority
priority
]
Specifies a TACACS+ server host.
no tacacs-server host
{
ip-address | hostname
}
Deletes a specified TACACS+ server host.
tacacs-server key [
key-
string
]
Specifies the authentication and encryption
key used for all TACAS communication
between the router and the TACACS+
server. This key must match the encryption
used on the TACACS daemon. (Range:0-
128 characters)
no tacacs-server key Returns to the default.
tacacs-server timeout
timeout
Specifies the timeout value in seconds.
(Range: 1-30)
no tacacs-server timeout Returns to the default.
tacacs-server source-ip
ip-address
Specifies the source IP address. (Range:
Valid IP address)
no tacacs-server source-
ip
ip-address
Returns to the default.