Filter
Top Products
372 Configuring Routing
www.dell.com | support.dell.com
Max Query Response Time (0-25)
— Maximum response time for advertising IGMP queries.
Response time adjusts the amount of traffic on a per sub-network basis. Varying the response time
affects the burst of network traffic. The higher the value the longer period of time passes between
host responses. The default value is 10 seconds.
Last Member Query Interval (0-25)
—Modifies the leave latency of the network. A reduced value
reduces the amount of time needed to detect the loss of the last group member. The default value
is 0.1.
Remove
— When checked, removes the IGMP interface.
Adding an IGMP Interface
1
Open the
IGMP Interface Parameters
page.
2
Click
Add
to display the
Add an IGMP Interface
page.
3
Select an interface from the
New Interface
drop down menu.
4
Complete the fields on the page.
5
Click
Apply Changes
.
The new IGMP Interface is added to the device.
Modifying an IGMP Interface
1
Open the
IGMP Interface Parameters
page.
2
Select the interface that you want to modify.
3
Modify the desired fields.
4
Click
Apply Changes
.
The IGMP Interface parameters are modified and saved to the device.
Deleting an IGMP Interface
1
Open the
IGMP Interface Parameters
page.
2
Click
Show All
to display the
IGMP Interface Table
page.
3
Select an IGMP interface, and check the
Remove
check box.
4
Click
Apply Changes
.
The IGMP interface is removed.
Configuring IGMP Interface Parameters Using CLI Commands
The following table contains the CLI commands for configuring IGMP interface parameters.