Filter
Top Products
Configuring System Information 199
Authentication Notifications
— Enables or disables the device sending SNMP traps when
authentication fails.
Enabling SNMP Notifications
1
Open the
Global Parameters
page
.
2
Select
Enable
in the
SNMP Notifications
field.
3
Click
Apply Changes
.
SNMP notifications are enabled, and the device is updated.
Enabling Authentication Notifications
1
Open the
Global Parameters
page
.
2
Select
Enable
in the
Authentication Notifications
field.
3
Click
Apply Changes
.
Authentication notifications are enabled, and the device is updated.
Enabling SNMP Notifications Using CLI Commands
The following table summarizes the equivalent CLI commands for defining fields displayed in the
Global Parameters
page.
Table 6-39. SNMP Notification CLI Commands
CLI Command Description
snmp-server engineID
local {
engineid-string
| default}
Specifies the SNMP engine ID on the local
device.
snmp-server enable
traps
Enables the device to send Simple Network
Management Protocol traps.
snmp-server trap
authentication
Enables the device to send Simple Network
Management Protocol traps when
authentication fails.
show snmp Shows the current SNMP device configuration.