Filter
Top Products
292 Configuring Switch Information
www.dell.com | support.dell.com
The following is an example of the CLI commands:
Console(config)# spanning-tree mst configuration
Console(config-mst)# instance 1 add vlan 10-20
Console(config-mst)# name region1
Console(config-mst)# revision 1
Console(config)# spanning-tree mst configuration
Console(config-mst)# instance 2 add vlan 21-30
Console(config-mst)# name region1
Console(config-mst)# revision 1
Console(config-mst)# show pending
spanning-tree mst
instance-id
priority
priority
Sets the device priority for the specified
spanning tree instance.
spanning-tree mst max-
hops
hop-count
Sets the number of hops in an MST region
before the BPDU is discarded and the
information held for a port is aged.
spanning-tree mst
instance-id
cost
cost
Sets the path cost of the port for MST
calculations
exit Exits the MST Configuration mode and
applies configuration changes.
abort Exits the MST Configuration mode without
applying configuration changes.
show {current | pending} Displays the current or pending MST region
configuration.
Pending MST configuration
Table 7-19. MSTP Instances CLI Commands
CLI Command Description