Filter
Top Products
350 Configuring Routing
www.dell.com | support.dell.com
Default Route Metric (1-16)
— The default route entry metric in RIP updates originating on this
interface. Zero indicates that no default route is originated.
Virtual Distance (1-16)
— Virtual number of hops assigned to the interface. This fine-tunes the
RIP routing algorithm.
Authentication Mode
— The interface authentication type, Password or MD5, used to
authenticate RIP ver. 2 messages.
Authentication Password
— The authentication password.
Authentication Key-Chain
—
The authentication key chain
.
Remove
— When checked, removes the RIP interface.
Adding a RIP Interface
1
Open the
RIP Interface Parameters
page.
2
Click
Add
to display the
New RIP Interface
page.
3
Complete the fields on the page.
The fields on this page are the same as those on the
RIP Interface Parameters
page.
4
Click
Apply Changes
.
Modifying RIP Interface Parameters
1
Open the
RIP Interface Parameters
page.
2
Modify the
fields as desired.
3
Click
Apply Changes
.
The RIP interface parameters are modified, and the device is updated.
Deleting a RIP Interface
1
Open the
RIP Interface Parameters
page.
2
Use the
RIP Interface
drop-down menu to select an RIP interface.
3
Check the
Remove
check box.
4
Click
Apply Changes
.
The RIP interface is removed and the device is updated.