Filter
Top Products
324 Configuring Switch Information
www.dell.com | support.dell.com
Figure 7-39. Bridge Multicast Forward All Page
VLAN ID
— Identifies a packet VLAN and contains information about the multicast group
address.
Ports
— Ports that can be added to a multicast service.
LAGs
— LAGs that can be added to a multicast service.
The following table contains the settings for managing router and port settings.
Attaching a Port to a Multicast Router or Switch
1
Open
Bridge Multicast Forward All
page.
2
Define the
VLAN ID
field.
3
Select a port in the
Ports
table, and assign the port a value.
Table 7-34. Bridge Multicast Forward All Router/Port Control
Port Control Definition
D Attaches the port to the Multicast router or
switch as a dynamic port.
S Attaches the port to the Multicast router or
switch as a static port.
F Forbidden
Blank Indicates that the port is not attached to a
Multicast router or switch.