Filter
Top Products
314 Configuring Switch Information
www.dell.com | support.dell.com
The
LACP Parameters
page contains sections for defining global parameters and port parameters.
LACP System Priority (1-65535)
— Indicates the LACP priority value for global settings. The
default value is 1.
Select a Port
— The port number to which timeout and priority values are assigned.
LACP Port Priority (1-65535)
— LACP priority value for the port.
LACP Timeout
— Administrative LACP timeout. Possible values are:
Short
— Specifies a short timeout value.
Long
— Specifies a long timeout value.
Defining Link Aggregation Global Parameters
1
Open the
LACP Parameters
page.
2
Complete the
LACP System Priority
and the
LACP Timeout
fields.
3
Click
Apply Changes
.
The parameters are defined, and the device is updated.
Defining Link Aggregation Port Parameters
1
Open the
LACP Parameters
page.
2
Scroll to the
Port Parameters
table.
3
Select the port for which you want to define parameters.
4
Define the
LACP System Priority
and the
LACP Timeout
fields.
5
Click
Apply Changes
.
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1
Open the
LACP Parameters
page.
2
Click
Show All
to display the
LACP Parameters Table
.
Configuring LACP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring LACP parameters
as displayed in the
Link Aggregation
page.
Table 7-29. LACP Parameters CLI Commands
CLI Command Description
lacp system-priority
value
Configures the system priority.