Filter
Top Products
414 Viewing Statistics
www.dell.com | support.dell.com
Rising /Falling Event
— The mechanism in which the alarms are reported, including a log, a trap,
or both. When a log is selected, there is no saving mechanism either in the device or in the
management system. However, if the device is not being reset, the event remains in the device Log
table. If a trap is selected, an SNMP trap is generated and reported via the Trap mechanism. The
trap can be saved using the same mechanism.
Falling Threshold
— The falling counter value that triggers the falling threshold alarm. The falling
threshold is graphically presented on top of the graph bars. Each monitored variable is designated a
color.
Startup Alarm
— The trigger that activates the alarm generation. Rising is defined by crossing the
threshold from a low-value threshold to a higher-value threshold.
Interval (sec)
— Alarm interval time.
Owner
— Device or user that defined the alarm.
Remove
— When checked, removes an RMON Alarm.
Adding an Alarm Table Entry
1
Open the
RMON Alarms
page.
2
Click
Add
to display the
Add an Alarm Entry
page.
Figure 9-13. Add an Alarm Entry Page