Filter
Top Products
Configuring Routing 365
Transmit Delay is 1 sec, State OTHER, Priority 1
Designated Router id 192.168.1.11, Interface address 192.168.1.11
Backup Designated router id 192.168.1.28, Interface addr
192.168.1.28
Timer intervals configured, Hello 10, Dead 60, Retransmit 5
Neighbor Count is 8, Adjacent neighbor count is 2
Adjacent with neighbor 192.168.1.28 (Backup Designated Router)
Viewing the Link State Table
The
OSPF Link State Table
page contains link state advertisement information for areas to which
the device is attached. Click
Router
→
OSPF
→
Link State Table
in the tree view.
Figure 8-16. OSPF Link State Table
Area ID
— The area ID.
Link Type
— Indicates the link type for the area.
Link ID
— The routing domain piece described by the advertisement. It is either a router ID or an
IP address.
Router ID
— The originating router in the autonomous system.
Sequence Number
— The link sequence number. The sequence number detects both old and
duplicate links state advertisements. The larger the sequence number the more recent the
advertisement.
Age
—Indicates the link age state advertisement in seconds.
Checksum
—Checksum of the advertisement complete contents, excluding the
Age
value.