Filter
Top Products
Configuring System Information 143
4
Click
Apply Changes
.
The log settings are saved, and the device is updated.
Defining a New Server
1
Open the
Remote Log Server Settings
page.
2
Click
Add
to display the
Add a Log Server
page.
NOTE: Before adding a new server, determine the IP address of the remote log server.
3
Complete the fields in the dialog and click
Apply Changes
.
The
Remote Log Server Settings
page displays the server in the
Available Server
list only after
you manually refresh the page.
Deleting a Log Server
1
Open the
Remote Log Server Settings
page.
2
Click
Show All
to open the
Log Server Table
page.
3
Select a server and check the
Remove
check box.
4
Click
Apply Changes
.
The server is deleted, and the device is updated.
Working with Remote Server Logs Using the CLI Commands
The following table lists the CLI commands for working with remote server logs.
The following is an example of the CLI commands:
Console (config) # logging 10.1.1.1 severity critical
Defining IP Addressing
Use the
IP Addressing
page to assign interface and default gateway IP addresses, and define ARP
and DHCP parameters for the interfaces.
To open the
IP Addressing
page, click
System
→
IP Addressing
in the tree view.
Table 6-17. Remote Log Server CLI Commands
CLI Command Description
logging
ip-address
[port
port] [severity
level
]
[facility
facility
]
[
description text
]
Logs messages to a remote server.