Filter
Top Products
Configuring Quality of Service 431
4
Enter values for the interface’s CIR and CBS.
5
Click
Apply Changes
.
The CIR and CBS for the selected interface are configured, and the device is updated.
Shaping Traffic on a Per Queue Basis
1
Open the
Bandwidth Settings
page.
2
Select an interface.
3
Check
Shaping per Queue on Selected Port
.
4
Enter CIR and CBS values for each queue.
5
Click
Apply Changes
.
The CIR and CBS for each queue on the selected interface are configured, and the device is
updated.
Configuring Queue Scheduling Settings Per Port
1
Open the
Bandwidth Settings
page.
NOTE: Use the Global Queue Settings page to modify queue scheduling settings globally.
2
For each of the eight queues, configure the
Strict Priority
setting, or enter a
Weight
.
3
For each queue that has been set system-wide as a WRR queue, enter a weight.
The weight ratio determines the frequency by which the packet scheduler dequeues packets
from each queue. The ratio for each queue is defined by the queue weight divided by the sum
of all queue weights (normalized weight), thus setting the bandwidth allocation for each
queue.
4
Click
Apply Changes
.
The device is updated.
Displaying the Port Bandwidth Settings Table
1
Open the
Bandwidth Settings
page.
2
Click
Show All
to display the
Port Bandwidth Settings Table
page.