Filter
Top Products
146 Configuring System Information
www.dell.com | support.dell.com
Defining IP Interface Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for working with fields on the
IP
Interface Parameters
page.
The following is an example of the CLI commands:
Console (config)# interface vlan 1
Console (config-if)# ip address 192.168.1.1 255.255.255.0
Console (config-if)# no ip address 192.168.1.1
Table 6-18. IP Interface Parameters CLI Commands
CLI Command Description
ip address
ip-address
{mask | prefix-length}
Sets an IP address.
no ip address [
ip-
address
]
Removes an IP address
show ip interface
[ethernet
s
| vlan
vlan-
id
|
port-channel
number
]
Displays the usability status of interfaces
configured for IP.
directed-broadcast Enables the translation of a directed
broadcast to physical broadcasts.